Backfire Zealot S2E
The Backfire Zealot S2E is an amazing budget option of the S2.
ABS+Glass fiber+maple
Composite deck
8 inch aluminium alloy
Rear truck Forged CNC Trucks
96*55mm polyurethane
80a Durometer Wheels
Samsung 40T 21700
14S2P battery pack
Accurate Battery
Smart BMS
FOC 60A
BACKFIRE ESC
875W*2 5255
Belt driven motors
Built-in deck
Atmospheric Lighting
180 Days
Warranty
LIGHT UP ABS STRIP
Encompassed within the ABS, we have installed luminous leds, so the ABS protected leds will not get damaged or broken during the normal use conditions. The technology took over 1 year R&D by Backfire.
ski technology
Its core is maple, which is wrapped with a layer of glass fiber, which boasts amazing flexibility. The entire board is well constructed & extremly durable.
14S ULTRA-HIGH VOLTAGE SYSTEM
The full charge voltage is 58.8V. High voltage has many advantages. To put it simply, the higher the voltage, the higher the efficiency, the longer the range
Unparalleled control
Our new custom 60A 14S ESC is designed for a smooth powerful ride that you can customize to fit your riding style.
Powerful Battery
The Zealot S2E features a 14S2P 58.8V Battery granting amazing performance for range getting you up to 30 Miles on a single charge!
High-Tech composite board
Finest Materials - Exquisite workmanship - Sophisticated Construction
Amazing Handling
Our newly designed 96*55 80A wheels offer smooth performance and locks you to the road wether you want to bomb a hill and slide or surf the road with tight carves.
Backfire MO Optional Tires
120mm MO Wheels are NOT included, to be purchased seperately! The New generation of Zealot motor protection case is designed to be detachable allowing for you to change to different wheels.
8" Gravity Cast Trucks
Copmpared with our previous generation of Zealots, the Zealot S2 has a wider footwell design. This allows you to be locked into the deck to be secure at high speeds and tight carves.
Gravity casting aluminium alloy
Pivot PU Bushing
SCM435 Kingpin
Rear Forged CNC Truck, Front truck Gravity Casting
50° Kingpin Rake on Baseplate
SHR Bushings
Alloy steelcup washers
4340 Alloy Steel Axle
This section doesn’t currently include any content. Add content to this section using the sidebar.
- Zealot S2E Electric Skateboard
- Remote
- Charger
- T-Tool
- Error Detection Cable
- Type-C Charging Cable
- 2x Belts
- 2x Pulleys
- Spare Screws
- Set of Hex wrenches
- Manual and sticker pack
Disclaimer:
- The actual range depends on many factors (rider's weight, average riding speed, road condition, wind speed, etc.)
- We provide the e-manual for download - Download Manuals
- IP65 Water Resistant Only, Not Waterproof! Do not ride in wet conditions, water damage is not covered under warranty and a damaged battery could cause fire risk!
Safety Warning:
- If you rode on wet ground with a risk of water entering your battery, please remove and check your battery.
- If there is any evidence of moisture, including water stains, disconnect the battery from your board immediately. Do not charge or use it! Keep the battery in a dry and fire resistant place to avoid potential fire risk (such as a sealed bucket outdoors).
- Do not keep a potentially water damaged battery indoors.
- Do not ship a potentially water damaged battery for service.
- Contact Backfire for next steps:
- In the USA: Tech@helloskate.com
- Global: Adi@helloskate.com
- Moisture inside a battery pack can cause corrosion and short circuits in electronics such as the BMS, lighting or USB boards. This may occur in days or weeks after water ingress.
- The Li-ion batteries in your pack contain lithium cobalt oxide and organic solvents. These components can self-sustain a fire when a battery is subjected to short circuits, excessive heat, and other stresses.