The most common used hardware for Backfire Electric Skateboards, please select the right model for your board. Feel free to contact our support if any questions.
Motor covers for G3 & Mini
Motor cover for G3 Plus
Motor cover with bearing for G3, Mini , G2 black and G3 Plus:
The 1st generation G2 black motor cover with bearing and magnets:
Wheels sleeve covers for G2S motors
Grease for G2S motors
FAQ for the remote:
Q: How to pair the new remote to the board?
When the power button on the board is flashing quickly, press and hold the power button on the remote, after about 5 seconds, the remote will pair to the board.
Q: How to change the speed mode on the remote?
When you fully stop the board (you can not during the riding), press the 2nd button on the remote, the light on the remote will flash in slow/ quick mode on the remote, which indicates the speed mode of the board.
Q: How to tell the battery life on the remote?
With a short press of the power button on the remote, the light will light up to show you the battery life: Four lights means full battery, 3 lights means above 80% of battery, 2 lights means above 60% of the battery and 1 light means around 35% to 0% of the battery.
Q: Why my first two lights dropped quicker than the last two lights ?
The light is not very accurate in evenly showing the battery life. The first two lights are about 35% of the battery, the 3rd light is about 30%, the last light is showing about 35% of the battery after some study.
Q: How to tell the battery is low?
Q: Which models can the remote pair to?
To make it easier for customers to want to order the accessories specifically for Zealot
We put them all together on one page:
105mm CloudWheel with Pulley Set: It comes with special pulley to work with the cloundwheels, also the motor cover is slightly different from the default cover. If you order the cloud wheel set 1st time, please make sure you get this option so you can make it work together. 608 2RS high speed bearings are pre-installed in wheels, 6903 bearings are pre-installed in the pulley as well.
After your first order, you will not need the pulley again if you just want to replace the wheels, you can order the 105mm Cloudwheel set without pulley as below.
96mm Wheel Set: They are the same wheel sets as installed on the Zealot by default. 608 2RS high speed bearings are pre-installed.
Belts:
HTD-260-5M 15 20 Belts for Zealot, these belts work for both 96mm wheels and 105mm Cloudwheels.
Cloudwheel Pulley
The pulley from zealot does not work with 105mm cloud wheels directly. If you plan to order the cloud wheels, please select the comb option provided including the pulley. If want to get the additional pulley,you can add this option.
Here are most common used screws and hardware for Backfire Electric skateboards.
Please select the specific option which works for your board.
Each photo contains the UOM of 1 set, and sell as set. For example: If you buy 1 set of M6*16MM screws for battery or ESC enclosure, you will get 6 pcs as 1 set showing in the photo.
If you can not find the specific hardware you need for your board, please reach out to our tech support via email for more details or questions.
