DKP Truck for Ranger X1/ X2 /X3/Hammer
DKP Truck for Ranger X1/ X2 /X3/Hammer
DKP Truck for Ranger X1/ X2 /X3/Hammer
DKP Truck for Ranger X1/ X2 /X3/Hammer
DKP Truck for Ranger X1/ X2 /X3/Hammer
DKP Truck for Ranger X1/ X2 /X3/Hammer
DKP Truck for Ranger X1/ X2 /X3/Hammer
DKP Truck for Ranger X1/ X2 /X3/Hammer

DKP Truck for Ranger X1/ X2 /X3/Hammer

Regular price $40.00 USD Save $-40.00 USD


20 in stock

Double kingpin truck which fit Backfire Ranger X1,X2 and X3.

  • The front Axle is the same for all three models with 9.5mm diameter (new front wheel with the 1614 bearings in the wheel), except the very 1st batch of Ranger X1 back in Nov. 2018 which was using the old front wheels with a square part. 
  • The back axle now fits both Ranger x2 and X3. However, it is different from the batch before May 2020 (Orders of the Ranger X2 since early May 2020 received units with new motor axles that have a thicker square mounting point on the trucks. This is because we upgraded to 32kv motors from the old 28kv motors. This means the Ranger X2 had a little more torque than before) 
  • The baseplates for the double kingpin truck are the same for both front and back. 
  • The bushings inside the truck are stock bushings, with hardness close to 96A. Bushing color is yellow in Ranger X2, and the bushing color is red in Ranger X3. There are no quality or hardness differences with two different colors. 
  • Ranger truck axles do not fit the wheels with 608 bearings in G2, G3,G3 plus or Zealot Wheels. 

 

 


You may also like