About Caliber II 50 Degree Truck Details:
To make it easier for customers to want to order the accessories specifically for Zealot or Zealot S.
We put them all together on one page:
105mm Cloud Wheel with Pulley Set: It comes with special pulley to work with the cloud wheels, also the motor cover is slightly different from the default cover. If you order the cloud wheel set 1st time, please make sure you get this option so you can make it work together. 608 2RS high speed bearings are pre-installed in wheels, 6903 bearings are pre-installed in the pulley as well.
After your first order, you will not need the pulley again if you just want to replace the wheels, you can order the 105mm Cloudwheel set without pulley as below.
96mm Wheel Set: They are the same wheel sets as installed on the Zealot by default. 608 2RS high speed bearings are pre-installed.
Belts:
HTD-260-5M 15 20 Belts for Zealot, these belts work for both 96mm wheels and 105mm Cloudwheels.
Cloudwheel Pulley
The pulley from zealot does not work with 105mm cloud wheels directly. If you plan to order the cloud wheels, please select the comb option provided including the pulley. If want to get the additional pulley,you can add this option.
Here are most commonly used screws and hardware for Backfire Electric skateboards.
Please select the specific option which works for your board.
Each photo contains the UOM of 1 set, and sell as set, or specifically how many pieces are listed. For example: If you buy 1 set of M6*16MM screws for battery or ESC enclosure, you will get 6 pcs as 1 set showing in the photo.
If you can not find the specific hardware you need for your board, please reach out to our tech support via email for more details or questions.
There are also bearings work in different hub motors. Some people might consider changing the bearings inside the hub motor if you are skilled to do so yourself.
Here are the list of specific bearing sizes for all our different models in the option.
We will carry and sell below bearings two pieces in a pair here:
Disclaimer :Motor cover with bearing for G3, Mini , G2 black and G3 Plus ( version 2 cover with bearing 6806 2RS is different from version 3 with the 6905 2RS bearing after June 2020, please check with our tech support first if you are not sure which version bearing cover you wanted):
96mm wheels provides more comfort to the riding on the rough roads, but reduce the torque of the board compare to the 85mm wheels. 85mm wheels provides more torque in acceleration, while 96mm wheels give you more comfort on rough roads.
The back sleeves are special designed to fit Backfire motors for certain models only. So these particular wheels and sleeve fit G3 PLUS, G3, MINI and G2 BLACK, BUT NOT fit: G2T or Other G2 models since 2017.
