- The hub motor is special designed for Backfire Ranger X2
- 1200W In-hub motor
- 6'' off road Tire is pre-installed, 165mm wheels.
- Back axle is included (if order the motor set only)
- MR30 connector
- Single Motor has the tire installed as well
- 6.5 inch(165mm) tire after installation (6 inch pre-installation)
- Airless rubber
- Fit Ranger X3 (Front Wheels also fix Ranger X2 or Ranger X1)
- Rubber tire with Rim Set: the rubber tire is pre-installed on the rims, easy to install (Rim does not fit Ranger X2 OR Ranger X1 due to motor structures)
- There are no magnets on the rim
These 400w generation 3 motors are working perfectly with smooth speed and break control, special programmed for Backfire g2 black and G2 galaxy 2020 electric skateboards.
Power system :
They fit Backfire G2 Black and Galaxy models, working under the10s2p power system with 36v to 42v input.
Connectors: 9 Pin , since June 2020, we updated all MR30 plug to 9 pin plugs for Motors and Esc, please select the correct option for your board. Feel free to check with our tech support if you are not sure to avoid order wrong parts.
The Back motor set include:
- 1 Back Truck set
- Two 400w motors with back wheel sleeves installed
The single motor without sleeve include:
- 1 single motor without sleeve
To make it easier for customers to want to order the accessories specifically for Zealot
We put them all together on one page:
105mm CloudWheel with Pulley Set: It comes with special pulley to work with the cloundwheels, also the motor cover is slightly different from the default cover. If you order the cloud wheel set 1st time, please make sure you get this option so you can make it work together. 608 2RS high speed bearings are pre-installed in wheels, 6903 bearings are pre-installed in the pulley as well.
After your first order, you will not need the pulley again if you just want to replace the wheels, you can order the 105mm Cloudwheel set without pulley as below.
96mm Wheel Set: They are the same wheel sets as installed on the Zealot by default. 608 2RS high speed bearings are pre-installed.
HTD-260-5M 15 20 Belts for Zealot, these belts work for both 96mm wheels and 105mm Cloudwheels.
The pulley from zealot does not work with 105mm cloud wheels directly. If you plan to order the cloud wheels, please select the comb option provided including the pulley. If want to get the additional pulley,you can add this option.