- Battery charger for Backfire Ranger X1, G2S & G2T
- Input:100- 240V
- Output: 42V, 2.5A
Galaxy G2t now introduces a brand new Turbo key: by pressing it, the board will enter the Turbo Mode, which gives 20% more power during acceleration. The Turbo mode lasts for 30 seconds then return to previous speed mode. This Turbo mode only adds extra power during acceleration, but doesn't increase top speed of the board.
FAQ for the remote:
Q: How to pair the new remote to the board?
When the power button on the board is flashing quickly, press and hold the power button on the remote, after about 5 seconds, the remote will pair to the board.
Q: How to change the speed mode on the remote?
When you fully stop the board (you can not during the riding), press the 2nd button on the remote, the light on the remote will flash in slow/ quick mode on the remote, which indicates the speed mode of the board.
Q: How to tell the battery life on the remote?
With a short press of the power button on the remote, the light will light up to show you the battery life: Four lights means full battery, 3 lights means above 80% of battery, 2 lights means above 60% of the battery and 1 light means around 35% to 0% of the battery.
Q: Why my first two lights dropped quicker than the last two lights ?
The light is not very accurate in evenly showing the battery life. The first two lights are about 35% of the battery, the 3rd light is about 30%, the last light is showing about 35% of the battery after some study.
Q: How to tell the battery is low?