- Professional Helmet designed for Electric Skateboarding, Long-boarding or Snowboarding.
- Customized with Backfire Logo.
- Ear covers keep you warm in cold weather, good for use in winter.The ear covers could be removed and re-installed.
- Compatible with snow goggles ( not included)
- Switch on top of the helmet to open two holes for air circulation
The Ranger X1 recently got an upgrade to its wheels in the latest batch. So what is so different about them?
Well As you can see below there is a different structure on the new wheels to the left. Each wheel weighs 550g compared to the old wheels which weigh 2600g. This is a massive improvement to the weight of the board making it easier to bring with you on a daily commute.
Not only is the weight improved but you may be wondering why the wheels came with a new hanger. Well, below you can see an up-close photo of the two hangers. On the left is the old hanger and on the right is the new one. You can see the main difference is the metal cutout at the end of the wheelbase. The old wheel has a square cutout that would be inserted into that square cutout. This was due to the special nature of the old wheels. The new wheels use regular bearings which means it does not need this square cutout anymore so it got changed to a circle to set the new wheel in the same position the old wheel was instead of slightly further out.
The wheels also add ride comfort. The old wheels would bottom out on large cracks between pavement. This is no longer an issue as the increased rubber on our new wheels absorbs the impact.
- Night Light can be mounted on any skateboards and longboard
- Light : 700 lumen , 10w
- Rechargeable battery inside : 2000mah, 3.7v
- Charging Voltage : DC 5v, 0.5a
- 3 lighting modes ( high beam , low beam, flashing)
The set includes:
- 2 front wheels, bearings installed
- 2 back hub wheels which fits for Backfire G2T and 2019 New G2 ( Do not fit for 2017 old G2 or G2S)
- Color: Gray
- Size: 83mm or 96mm
- Fixed speed road cruise
- Eco mode, Sport Mode, Turbo Mode (Turbo mode only works with Samsung 6.0 battery)
- Board status display: mode, speed, range, battery, connection etc
- Speed and range unit setting: miles or kilometers
- Wheel diameter setting: 83mm 96mm or 165mm
- 1 Unit of R2 Wireless Remote with OLED Display
- 1 ESC with the enclosure and power button connected
- Screws are not included( showing in the photo for demo only)
- ECS enclosure size : 7.2 inch * 7.4 Inch * 2 inch
- One Back Truck
- Two 350W In-Hub Motors with 83mm wheels installed( MR30 connector)
- Optional: Two Front 83mm Wheels ( Front Truck is NOT included, the picture is demonstrating)